Sector 9A, Gurgaon, Haryana
GST No. 06BOSPT4909Q1ZT
Call 08047631309 82% Response Rate
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | Graphtec |
Model Name/Number | CE7000-130 |
Configuration | Grit rolling type |
Supported Media width | 50 inches |
RAM | 2MB |
Minimum Character Size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
Items | CE7000-130 |
Configuration | Grit rolling type |
Drive method | Digital servo drive |
Max. cutting area (W x L) (*1) | 1270 × 50 |
Cutting area of guaranteed accuracy (*1) | 1250 × 2m |
Mountable media width | 1372mm (54inch) |
Mountable roll media mass | 17 kg |
Number of push rollers | 4 rollers (Max. 5 (option)) |
Max. cutting speed | 1000mm/s at 45° direction |
Acceleration | 13.9m/s2 at 45° direction |
Cutting force | Max. 4.41N (450gf) |
Minimum character size | Approx. 5 mm alphanumeric (varies depending on character font and media) |
Mechanical resolution | 0.005mm |
Programmable resolution | GP-GL 0.1/0.05/0.025/0.01 HP-GL™ (*2 0.025 |
Repeatability (*1) | Max. 0.1 mm in plot up to 2 m (Excluding media expansion and contraction) |
Mountable number of tools | 1 tool |
Blade types | Supersteel |
Pen types | Oil-based ballpoint pen, Water-based fiber-tip pen |
Media types | Up to 0.25mm thickness ,Marking film (PVC / fluorescence / reflection), polyester film (With specified conditions) |
Additional Information:
View Complete details
Product Brochure
Minimum Order Quantity | 1 Piece |
Model Name/Number | FCX2000-180VC |
Configuration | Digital servo system, Flatbed |
Minimum Character Size | Approx. 10 mm |
Brand/Make | Graphtec |
Max Cutting Speed (mm/sec) | 400 mm/s (1 to 40 cm/s in 16 Steps) |
Buffer Memory | 2 MB |
Blade Material | Supersteel |
Model name | FCX2000-180VC | |||
Configuration | Digital servo system, Flatbed | |||
Media hold-down method | Vacuum suction | |||
Effective cutting area | 1,800mm x 920mm | |||
Mountable media (Y-axis) | 950mm | |||
Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | |||
Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | |||
Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | |||
Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | |||
Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) | |||
Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | |||
Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) | |||
Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | |||
Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | |||
Number of tools | Two tools | |||
Pen, and tool types | Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | |||
Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes |
Additional Information:
View Complete details
Product Brochure
Minimum Order Quantity | 1 Piece |
Driven Type | Electric |
Classification | Double-blade Cutter |
Applications | Full Cutting,Creasing,Partten cutting |
Model Type | FC4000-50ES |
Usage/Application | PVC,Paper,Sticker,Lable |
Blade Material | Stainless Steel |
Brand/Make | Graphtec |
Item | FCX4000-50ES | ||
Configuration | Digital servo system, Flatbed | ||
Media hold-down method | Electrostatic panel | ||
Effective cutting area | 661 mm × 488 mm | ||
Mountable media | 537 mm | ||
(Y-axis direction) | |||
Maximum cutting speed | 751 mm/s (1 to 75 cm/s in 23 steps) | ||
Cutting pressure | Tool 1: Max. 5.88 N 600 gf) | ||
Tool 2: Max. 5.88 N 600 gf) | |||
Cutting force settings | Tool 1: in 48 steps, Tool 2: in 48 steps | ||
Minimum character size | Approx. 10 mm square (varies with character font and media) | ||
Mechanical resolution | 0.005 mm (5µm) | ||
Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, | ||
HP-GL™ (*1) : 0.025 mm | |||
Distance accuracy | Max.0.2% of the distance moved or 0.1mm, whichever is larger | ||
(excluding contraction of media, in plotting/cutting mode) (*2) | |||
Perpendicularity | Max 0.3 mm / 430 mm | ||
Repeatability | Max 0.1mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||
Standard interfaces | USB2.0 (Full Speed) / RS-232C / Ethernet (10BASE-T/100BASE-TX) | ||
Buffer memory | 2MB | ||
Command sets | GP-GL / HP-GL™ / AUTO (Automatic switching in GP-GL and HP-GL™) | ||
Number of tools | 3 tools |
Additional Information:
View Complete details
Product Brochure
Model name | FCX2000-120VC |
Configuration | Digital servo system, Flatbed |
Media hold-down method | Electrostatic |
Effective cutting area | 1,200mm x 920mm |
Mountable media (Y-axis) | 950mm |
Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg |
Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) |
Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps |
Minimum character size | Approx. 10 mm square (varies with character font and media) |
Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm |
Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) |
Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) |
Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) |
Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) |
Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) |
Number of tools | Two tools |
Pen, and tool types | Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool |
Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes |
Additional Information:
View Complete details
Product Brochure
Minimum Order Quantity | 1 Piece |
Brand | Graphtec |
Model Name/Number | FCX2000-60 |
Effective Cutting Area | 610mm x 920mm |
Power Source | 100 to 240 V AC,50/60 Hz (Auto Switching) |
Maximum Cutting Speed | 400 mm/s (1 to 40 cm/s in 16 Steps) |
Buffer Memory | 2 MB |
Model name | FCX2000-60VC | |||
Configuration | Digital servo system, Flatbed | |||
Media hold-down method | Vacuum Suction | |||
Mountable media (Y-axis) | 950mm | |||
Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | |||
Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | |||
Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | |||
Minimum character size | Approx. 10 mm square (varies with character font and media) | |||
Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | |||
Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) (*2) | |||
Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | |||
Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2) | |||
Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | |||
Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | |||
Number of tools | Two tools | |||
Cutting blade, pen, and tool types | Cutting blade (Supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | |||
Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | |||
Power consumption | Max. 140 VA | |||
Registration mark sensing system | Scans the mark by optical sensor (ARMS5.0), Segment area and Multiple-mark compensation, 4-points axis alignment, Auto mark detect |
Additional Information:
View Complete details
Product Brochure
Minimum Order Quantity | 1 Piece |
Brand | Graphtec |
Model Name/Number | FCX2000-60VC |
Driven Type | Electric |
Classification | Double-blade Cutter |
Applications | half cut,full cut,box making |
Blade Material | Stainless Steel |
Model name | FCX2000-60VC | ||||
Configuration | Digital servo system, Flatbed | ||||
Media hold-down method | Vacuum suction | ||||
Effective cutting area | 610mm x 920mm | ||||
Mountable media (Y-axis) | 950mm | ||||
Roll media support | Roll media stocker (manual feeding), supported media; width: up to 950 mm, weight: up to 5 kg | ||||
Maximum cutting speed | 400 mm/s (1 to 40 cm/s in 16 steps), in all directions | ||||
Cutting force | Tool 1: Max. 4.9 N (500 gf), Tool 2: Max. 9.8 N (1 kgf) | ||||
Cutting force settings | Tool 1: in 40 steps, Tool 2: in 40 steps | ||||
Minimum character size | Approx. 10 mm square (varies with character font and media) | ||||
Programmable resolution | GP-GL mode: 0.1/0.05/0.025/0.01 mm, HP-GL™ : 0.025 mm | ||||
Distance accuracy | Max. 0.1% of the distance moved or 0.1 mm, whichever is larger (in plotting mode) (*2) | ||||
Perpendicularity | Max 0.5 mm / 900 mm (in plotting mode) | ||||
Repeatability | Max 0.1 mm (excluding contraction of media, in plotting/cutting mode) (*2) | ||||
Standard interfaces | RS-232C, USB2.0 (High-Speed), and Ethernet (10BASE-T/100BASE-TX) | ||||
Buffer memory | 2MB | ||||
Command sets | GP-GL and HP-GL™ emulation (set by menu, or selects automatically by received data) | ||||
Number of tools | Two tools | ||||
Cutting blade, pen, and tool types | Cutting blade (supersteel), Pens (Water-based fiber-tip pen, oil-based ballpoint pen), and Creasing/scoring tool | ||||
Others | ARMS, Reverse side Cutting/Creasing using ARMS, ARMS Copy function, Creasing, Cutting/creasing in multiple passes | ||||
Power source | 100 to 240 VAC, 50/60 Hz (Auto switching) | ||||
Power consumption | Max. 140 VA |
Additional Information:
View Complete details